4-4 DISASSEMBLY AND ASSEMBLY
• Remove the front protectors E by removing their bolts D.
• Remove the radiator louvers F, left and right.
• Remove the radiator mounting bolts G, left and right.
• Loosen the radiator hose clamps H.
• Disconnect the radiator hoses I and J.
• Remove the radiator hose K.
• Disconnect the ECT sensor coupler L.
• Disconnect the GP switch coupler M.
• Remove the GP switch lead wire from the clamp N.
• Disconnect the magneto lead wire coupler O.
• Remove the clamps P.
To Next Page
Loading...
