17. ELECTRICAL SYSTEM
17-12
Light / Bulb
Replacing bulb for headlight
Remove the front cover.
Disconnect the terminal coupler and the rubber
sleeve from the headlight.
Remove the bulb spring holder and the bulb.
Replace with new bulb if necessary.
Caution
y Never touch the bulb with finger, which will
create a heat point.
y Clean the fingerprint left on the bulb with
alcohol.
Install the bulb of the headlight in reverse order of
removal.
Upon completion of replacement, turn on the main
switch to ensure the headlight works well.
Adjust the beam and distance of the headlight if
necessary.
To this chapter contents
Holder
Bulb
Headlight
Position light
Headlight adjustment screw
Headlight Position light
Headlight
Position light
To Next Page
Loading...
Need help?
General
