1
TimeSource 3100 111
TL1 Reference
097-72020-01 Issue 9: November 2003
2
5
3
SSSSSSSSSSSS SSSS S SSSSS SSSS SSS S SSS S SSSSS
44
Command Format
A command consists of a command code of up to three fields separated by hyphens,
followed by parameter blocks separated by colons. Figure 27 shows the command format.
Parameter blocks consist of one or more parameters separated by commas.
Parameter blocks may be null (contain no parameters), or contain one or more parameters.
Two colons occur next to each other if a parameter block is null.
Multiple parameters in a parameter block are separated by commas. Two commas occur next
to each other if a parameter is null.
Entering a semicolon at the end of the command indicates that the command statement is
completed to the interpreter, and executes the command.
Figure 27. Command Format
To Next Page
Loading...
Need help?
General
