SSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS S
4
184 TimeSource 3100
TL1 Reference
097-72020-01 Issue 9: November 2003
Set Source Identifier
This command sets the name of the equipment sending the message. The command format
is:
SET-SID:[<tid>]::<ctag>::<sid>;
Response Format:
<sid> <date> <time>
M <ctag> COMPLD
/*LINK:<link>,CMD:<command>*/
;
Parameter Description
<sid> Source identifier – can be up to 20 uppercase or
lowercase ASCII characters