SSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS S
2
38 TimeSource 3100
Engineering and Ordering
097-72020-01 Issue 9: November 2003
IRIG-B TOD (990-72020-05 Systems Only)
If using the IRIG-B TOD outputs (990-72020-05 TimeSource 3100 System), right-angle
BNC connectors are provided to prevent small radius turns in the IRIG-B TOD cables. The
right-angle BNC connectors may be attached to the IRIG-B BNC adapter (also provided)
BNC connectors, to direct the cables from the shelf as desired.
For each IRIG-B TOD output, a customer-supplied cable with BNC connectors on each end
is installed between the adapter and the network elements requiring IRIG-B TOD timing.
To Next Page
Loading...
Need help?
General
