1
TimeSource 3100 143
TL1 Reference
097-72020-01 Issue 9: November 2003
2
5
3
SSSSSSSSSSSS SSSS S SSSSS SSSS SSS S SSS S SSSSS
44
Enter User Security
This command allows a system administrator to enter a new user, including the user name,
password, and access level. The command format is:
ENT-USER-SECU:[<tid>]:<uid>:<ctag>:
:<pid>
,,<uap>;
Command Example:
ENT-USER-SECU::TELECOM:<ctag>::TS3000!!,,1;
Response Format:
<sid> <date> <time>
M <ctag> COMPLD
/*LINK:<link>,CMD:<command>*/
;
Parameter Description
<uid> User name – must start with an alpha character and have a maximum of
10 characters.
<pid> Password – has to be a minimum of 8 characters and a maximum
of 10 characters. It must contain at least one digit and one of the
following characters:
! $ % ' ( ) * + . / < > ? @
Password cannot be the same as User ID even if extra characters
are appended to password at the end.
<uap> Access level (1 to 5). Levels 1 to 4 do not allow the user to enter or
delete users. Level 5 allows the user to enter or delete users.
To Next Page
Loading...
Need help?
General
