SSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS S
4
146 TimeSource 3100
TL1 Reference
097-72020-01 Issue 9: November 2003
Initialize System
This command resets the specified processor.
Caution: Using this command with an <aid> of TS3100 will cause a loss of outputs for
approximately 20 minutes if ALMOUT is SQUELCH, or unstable outputs if ALMOUT is not
SQUELCH.
The command format is:
INIT-SYS:[<tid>]:<aid>:<ctag>::1;
Response Format:
<sid> <date> <time>
M <ctag> COMPLD
/*LINK:<link>,CMD:<command>*/
;
Aid Item Addressed
TS3100 System software
GPS GPS receiver software