SSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS S
4
124 TimeSource 3100
TL1 Reference
097-72020-01 Issue 9: November 2003
Copy Memory
This command copies a software program from an external computer to the TimeSource
3100, or copies the system database to nonvolatile memory.
Notes:
1. Clear any existing alarms before using this command.
2. The database is automatically copied to nonvolatile memory once per hour. However, if
power to the TimeSource 3100 is interrupted before the automatic copying occurs,
changes made since the last automatic copy will be lost. To avoid the possibility of losing
database changes, the Copy Memory command may be used to copy database changes to
nonvolatile memory after any changes are made.
To copy a program from an external computer to nonvolatile memory within the
TimeSource 3100, the command format is:
CPY-MEM:[<tid>]:<aid>:<ctag>::AUX,,WKG:PGM;
Aid Item Addressed
TS3100 System software
GPS GPS receiver software
DEV2 TimeSource 3100 without module (990-72020-01
systems)
DEV4 TimeSource 3100 with module for TOD IRIG-B outputs
(990-72020-05 systems)
DEV6 TimeSource 3100 with module for additional E1 or
2.048 MHz outputs (990-72020-02 systems)
DEV8 TimeSource 3100 with module for ESCIU ports
(990-72020-04 systems)
DEV10 TimeSource 3100 with mixed E1/T1 cards
(990-72020-06 systems)
To Next Page
Loading...
Need help?
General
