SSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS S
4
154 TimeSource 3100
TL1 Reference
097-72020-01 Issue 9: November 2003
Retrieve Condition All
This command displays all current system alarms and events. The command format is:
RTRV-COND-ALL:[<tid>]:ALL:<ctag>;
If there are no alarms or events:
<sid> <date> <time>
M <ctag> COMPLD
/*LINK:<link>,CMD:<command>*/
;
If there is at least one alarm or event:
<sid> <date> <time>
M <ctag> COMPLD
"<aid>:<ntfcncde>,<condtype>,<srveff>,
<ocrdat>,<ocrtm>,,,:\"<conddescr>\""..
/*LINK:<link>,CMD:<command>*/
;
Note: Refer to the Troubleshooting chapter for a list of all <conddescr> messages,
and the recommended action.
To Next Page
Loading...
Need help?
General
