SSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS S
4
112 TimeSource 3100
TL1 Reference
097-72020-01 Issue 9: November 2003
Response Format
When a command is received and processed, a response is returned. All responses include a
source identifier (<sid>), the date, the time, an M to indicate that it is a response to a
command, and the correlation tag (<ctag>) that was entered with the command.
Figure 28 shows the completed response format. COMPLD indicates that the command was
completed without error.
Figure 29 shows the denied response format. DENY indicates that the command was denied
due to an error. The <errcde> parameter indicates the corresponding error type, or cause of
the error.
Figure 28. Completed Response Format
Figure 29. Deny Response Format
^^^<sid>^<date>^<time>
M^^<ctag>^COMPLD
^^^/*LINK:,link>,CMD:<command>*/
;
Note: If the command was a query, additional information would be displayed before the semicolon.
^^^<sid>^<date>^<time>
M^^<ctag>^DENY
^^<errcode>
^^^/* <error message> */
^^^/*LINK:,link>,CMD:<command>*/
;
To Next Page
Loading...
Need help?
General
