SSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS S
4
142 TimeSource 3100
TL1 Reference
097-72020-01 Issue 9: November 2003
Enter Equipment (cont’d)
The parameters which can be entered in the <spec_block> are listed below. For any specific
<aid> entered in a command, only certain parameters are valid. For each valid parameter,
choose the appropriate value from the Value column. When entering multiple parameters,
separate the parameters with commas.
Example to set an input to be monitored, but not ensembled:
ENT-EQPT:[<tid>]:RO-A:<ctag>;
Example to set an input to be monitored and ensembled:
ENT-EQPT:[<tid>]:RO-A:<ctag>:::ENSEMBLER=ALW;
Response Format:
<sid> <date> <time>
M <ctag> COMPLD
/*LINK:<link>,CMD:<command>*/
;
Aid Parameter Value Description
RO-a ENSEMBLER=b b=ALW Remote oscillator is monitored and
ensembled
b=INH Remote oscillator is monitored, but not
ensembled
SPAN-a ENSEMBLER=b b=ALW Span is monitored and ensembled
b=INH Span is monitored, but not ensembled
To Next Page
Loading...
Need help?
General
