T-solution MASTER-K120S - Page 124

Chapter 7 Usage of Various Functions
7-40
7.2.1 A/DD/A Combination module
1) Performance specification
The performance specification of the analog mixture module are following.
Specifications
Item
G7F-ADHA G7F-ADHB
Voltage
DC 010V (input resistance more than 1 )
Input range
Current
DC 020  (input resistance 250)
DC 420  (input resistance 250)
Classified by parameter
Digital output
12Bit( 0~4000)
1.Settin
g
b
y
j
umper pin for V/I selection
on upper part of product
(Up: voltage, Down: Current)
1.Setting by dipswitch for V/I selection
on left side of product
(Left voltage, Right: Current)
Voltage/Current
selection
2. Voltage/current selected by KGLWIN parameter
3. When current input is used, short the V and I terminal
No. of channel 2 Channels/ 1 module
Voltage DC +12V
Analog Input
Absolute max. input
Current
DC +24 
Voltage
DC 010V (External load resistance 2 1 )
Output range
Current
DC 020  (External load resistance 510)
DC 420  (External load resistance 510)
Classified by parameter
Digital Input
12Bit( 0~4000)
Voltage/Current
selection
Separated from terminal
No. of channel 1Channel / 1 module 1Channel / 2 module
Voltage DC +12V
Analog output
Absolute max. output
Current
DC +24 
Voltage
DC010V : 2.5  (1/4000)
DC020 : 5  (1/4000 )
Max. resolution
Current
DC420 : 6.25  (1/3200 )
Accuracy
0.5% [Full scale ]
Max. conversion
speed
1/CH + scan time
Isolation
Photo coupler insulation between I/O terminals and PLC power supply
(No isolation between channels)
Connect terminal 9 Points terminals *2 8 Points terminals *2
Internal current
Consumption
20 
DC 21.6  26.4V
External power
supply
80  95 
Common
Weight
240g 180g
Remark
1
)
Offset/
g
ain value can’t be changed, it is fixed.
2) Analog inputting is set the current since this is manufactured.
3) Extend to use max.3 Modules