T-solution MASTER-K120S - Positioning Indirect Start(POSIST)

Chapter 7 Usage of Various Functions
7-91
7.3.4 Instructions
1) Positioning Indirect start(POSIST)
Available device
Flag
Instruction
M P K L F T C S D
#
D integer
No. of
steps
Error
(F110)
Zero
(F111)
Carry
(F112)
S ○
n
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
5
○
S Channel which is designated at parameter(0~1)
Starting step No.(0~20)
Error
(F110)
Error flag turns on when designating area is over
and the instruction isn’t executed
n
When designated as 0, starting step is increased
automatically
■ POSIST S n
(1) Functions
• When input condition turns on, corresponding positioning control starts from assigned step No.
• Positioning operation is edge triggered
.
(2) Example program
• When input condition turns on, Ch.0 starts positioning from Step no.1
POSIST Positioning Indirect Start
Desi
g
nation
Fla
g
set