Chapter 7 Usage of Various Functions
7-42
(2) G7F-ADHB
No Contents.
RUN LED
Indicate the operating status the G7F-ADHB
Analog input terminal
Voltage Input
Current input
When current input is used, short the V and I terminal.
Dip switch of analog input
Right : current input
Left : voltage input
Analog output terminal
Voltage output
Current output
Only one type of output (Current or Voltage)is available on a module
External power input terminal
External voltage 24VDC needs to this terminal.
Extension cable
This cable is used to connect while analog mixture module is used.
.
Extension cable connector
The connector connects extension cable when extended module is
used.
V0 I0
COM0
To Next Page
Loading...
