Chapter 8 Communication Functions
8-52
⑧ Program
• When the data is received at frame no. 1, link relay L001 turns on during 1 scan. At that moment, M000 increases and the
value of M000 moves output relay P004.
• The new value of M000 is sending again every 1 second period (F092 is 1second period flag)
• The number of sending normally stores D000.
• When error occurs, the number of sending error stored in D001.
2) Setting and program of slave station
① Make the new project file and setting new parameter.
② Click the list after set the communication method and communication channel.
To Next Page
Loading...
