Tailift TPR720A - Chang the Oil Inside the Gearbox

7-5
7.2.6 Chang the oil inside the gearbox.
It calls for only one person to do it. Please power off and press down the emergent stop
button before carrying out the job.
Instruction to the relevant parts.
1.
Oil filler points
It is the open where oil is added after the oil in the container isn’t
enough or needs to be replaced.
2.
Oil gauge The volume of the oil is visible here. Generally, The oil level should
be between the upper and the lower lines. If it reaches the lower
limit, oil needs to be added, at the utmost to its upper line, but not
over it.
3.
Oil drain outlet
It is to drain the oil when oil is to be replaced.
The following is the Tool for replacing the oil.
Oil (CC68) 4.5 L
Container and spanner
The Steps：
：：
：
1.
Power off.
2.
Press down the emergent stop button.
3.
Place a container under the oil drain outlet.
4.
Release the drain plug using a spanner.
5.
After draining, tape the plug with a sheet of band and tighten it back to the drain outlet.
6.
Release the oil filler plug.
7.
Add oil to the upper limit of the oil gauge.
8.
Tighten the oil filler plug.