5-10
Ⅱ
ⅡⅡ
Ⅱ.FOR TPR1100(Type I)
Description for Switches.
For TPR-1100 (Type I)
1.
It is for operator’s understanding whether the working situation is
normal.
2.
Feeding light
It lights when at feeding. After work finished and power off, it turns
off .
3.
The cutting fluids
switch
It is a switch to start on or off the lubrication when at boring, where
the boring or shearing causes high temperature, making the drilling
bit easy to wear. The lubrication can reduce the temperature and
lengthen the life of the drilling bit. Turn on to start and off to stop the
lubrication. The floating capacity is decided by another knob called
the cutting fluids adjusting knob.
4.
Emergent stop It is pressed to stop the machine when at processing and emergence
occurs. Pull it again for back to release the stop.
5.
Power light When the external power and the main machine power switch are on,
The power light will be on ,indicating to the operator that the power
is on.
6 Pole change switch The spindle motor is a pole variable one, a regular motor has 4 pole.
But this one is changeable between 4 and 8 pole . It can change the
Spindle rotating speed.
To Next Page
Loading...
