4-103
4
PILOT VALVE (AUXILIARY)
DISASSEMBLY AND ASSEMBLY
13. Insert the cam shaft while holding down the cam.
Apply grease to the sliding parts of the cam shaft
bearing.
14.
Apply Loctite to the hexagon setscrew.
Hexagon setscrew: Loctite #241 or equivalent
15. Tighten the hexagon setscrew with the specified
torque.
Hexagon setscrew: 6.9 ±1.0 N∙m
16. Tilt the cam and apply grease to the head of the push
road.
To avoid scratching the surfaces of the push rod
and the plug when applying grease, use a spatula
made of a soft material.
To Next Page
Loading...
