4-151
4
TRAVEL MOTOR
DISASSEMBLY AND ASSEMBLY
17. Install the piston (12) and guide (13) on the shoe holder
(11) to make the shoe holder assembly.
18. Install the shoe holder assembly on the cylinder block
to make the cylinder block assembly.
19. Install the cylinder block assembly on the flange hold-
er
.
• Install the cylinder block assembly in such a manner
that the shoe will touch the swash plate.
20. Install the center discs (14) on the groove of the flange
holder, and the friction discs (15) on the groove of the
cylinder block.
• Total number of center discs: 3
• Total number of friction disc: 2
To Next Page
Loading...
