TDK-Lambda GH10-100 - Page 162

151
Function
Slave Role
Special Current Upper Limit (SCUL)
RATED
Enable registers
Not Affected (Preserves Setting)
Event registers
Not Affected (Preserves Setting)
Power-On Status Clear
Not Affected (Preserves Setting)
Display Brightness
Not Affected (Preserves Setting)
Display Dim Delay [S]
Not Affected (Preserves Setting)
Display Dim Brightness
Not Affected (Preserves Setting)
Factory Calibration Parameters
Not Affected (Preserves Setting)
Table 5-4: Slave Role Non-Volatile Memory Parameters
NOTE
Slave unit parameters read by communication might not reflect actual system status. I.e. slave
power supply does not reflect OCL mode, Constant Power mode, Slew-rate mode, etc…
NOTE
LAN non-volatile memory parameters are not affected (for default parameters, refer to
Table 2-7:
LAN Non-Volatile Memory Parameters ). The only affected parameter is the Host Name which is
updated due to system identification update.