Teac VR-10 - Recording Screen

26 TEAC VR-10
u Built-in speaker setting status
This shows whether the built-in speaker is
ON or OFF.
: The speaker is set to ON.
: The speaker is set to OFF.
NOTE
Even if the SPEAKER setting is ON , no sound is
output from the speaker when recording or in
recording standby, or when headphones or a moni-
toring system is connected.
Recording Screen
1 Recorder operation status
This icon shows the recorder operation status.
Icon Meaning
ª
Stopped or in standby
–
Recording
2 Remaining recording time
This shows the remaining recording time,
which depends on the remaining card
capacity and the ENCODING setting.
3 Level meters
This shows the input sound levels.
4 File name
The name that is automatically given to the
file being recorded is shown
5 Auto record function status
When the auto record function is ON, the
icon appears.
2 – Names and functions of parts