Teac VR-10 - Recording; Recording Settings and Quality

TEAC VR-10 39
In addition to recording with the built-in
microphone, this unit can also record the signal
from an external microphone, the headphone jack
of a portable CD player or other external audio
device.
Making recording settings
Setting the recording quality
Before starting recording, set the audio le format.
In addition to choosing stereo or monaural, set
the audio le format to PCM or MP3 to suit your
purposes, including whether you want to prioritize
sound quality or recording time.
NOTE
PCM formats allow recording at higher quality •
than MP3 formats.
MP3 formats allow recording for a longer time •
than PCM formats.
With MP3 formats, higher bit-rates allow better •
recording quality.
For information about recording times, see •
“Recording formats and times” on page 58.
1 Press the SETUP key to open the SETUP
menu screen.
2 Use the +/– keys to select the REC menu item.
3 Press the
¯
( Enter ) key to open the REC
menu screen.
4 Use the +/– keys to select the ENCODING
item.
4 – Recording