Teac VR-10 - Connecting Monitoring Equipment

TEAC VR-10 37
6 When you have finished making the setting,
press the HOME key to return to the Home
Screen.
NOTE
Even if the SPEAKER setting is ON, no sound is
output from the speaker when recording or in
recording standby, or when headphones or a moni-
toring system is connected.
Connecting monitoring equipment
To monitor with headphones, connect them to the
/LINE OUT jack.
To monitor with an external monitoring system
(powered monitor speakers or an amplier and
speakers), connect it to the /LINE OUT jack.
Headphones
3 – Preparations