Teac VR-10 - Page 47

TEAC VR-10 47
7 Press the
¯
( Enter ) key to open the ON/
OFF setting screen.
8 Use the +/– keys to select ON . (The default
value is OFF .)
9 Press the
¯
( Enter ) key to confirm the
setting and show a pop-up with the setting
briefly, and then return to the AUTO REC
ON/OFF screen
10 Press the
Â
( Back ) key to return to the
AUTO REC menu screen
11 Use the +/– keys to select the THRESHOLD
item.
12 Press the
¯
( Enter ) key to open the
THRESHOLD setting screen.
13 Set the level at which recording starts and
pauses ( THRESHOLD LEVEL ). A ¶ icon
4 – Recording