Note: Model match and Multi Bind does not work together if the model id is not the same in both radios.
Note:
At the moment, OpenTX does not support the model match function in their stable release. This means
that you need to make sure that you selected the right model in your radio.
Due to this, you can use the same model in your radio with all your drones. Model match is available as
nightly build (2020.08.21) from TBS. You can download the OpenTX version here.
In OpenTX your model number in the memory will be set as default Model Id when you create a new
model. If you want to use Multi Bind on a other radio with no Model Id option, make sure you have set it
to 00 before
To Next Page
Loading...
