Finally a last warning is given about the execution of
the update, with information about seal breakage if
applicable:
This is the last opportunity to abort the update
procedure by means of <F3>:
Pressing <F1> executes the update
procedure.
First of all a backup copy of the current memory
contents is made:
The original condition can be restored
with this backup copy if the update
should fail.
In the next step the memory is cleared:
From this point in time onwards, a power
failure, for example, would lead to failure
of the update procedure!
Finally the file selected beforehand is transferred to
the memory:
MultiLevel Instruction Manual Other Information
To Next Page
Loading...
