3132122 – Ice protection oset
standard value is 25.0 mm and may only be changed in exceptional cases
on consultation with TechnipFMC.
3132123 – Inclination tab. oset
and may only be changed in exceptional cases on consultation with Technip-
FMC.
3132124 – Float oset
level sensor.
3132125 – X shift
The inclination table in can be shifted in the X-direction (longitudinal direction)
here. This can be necessary if the level sensor is shifted in the longitudinal
direction due to manufacturing tolerances.
3132126 – Y shift
The inclination table can be shifted in the Y-direction (transverse direction)
here. This can be necessary if the level sensor is shifted in the transverse
direction due to manufacturing tolerances.
3132127 – Temp oset
not normally needed and is left at 0 °C.)
9.7.1.3.1.1.3. Compartments 1 Data – 313213
Further compartment-specific data is data here:
3132131 – Compartment volume
The compartment volume in liters is
entered here.
MultiLevel Instruction Manual MENU structure
To Next Page
Loading...
