๎ฌ๎๎๎๎๎๎ต๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎ฐ๎ฑ๎ฉ๎๎๎๎๎๎จ๎ฑ๎๎๎๎ง๎ฒ๎ฎ๎๎๎๎๎๎จ๎๎๎๎ณ๎๎๎๎๎๎
6 โ Installation of the mechanical level sensor components
6.1. Packing the level sensors
The level sensors are sensitive measuring instruments, which must be
transported and handled carefully. The level sensors must be transported
in sturdy packaging. Improper packaging leads to transport damage!
Figure 19: Level sensor with foam parts and outer packaging
Figure 20: Fixing the foam parts
๎ท๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎
๎๎๎ฟ๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎
๎๎๎๎๎๎๎๎ฟ๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎๎
Figure 21: Secure the lids at both ends of the outer packaging with metal staples
Before pushing the lids onto the outer packaging at left and right, secure the
level sensor against slipping appropriately using foam parts or polystyrene!
MultiLevel Instruction Manual Installation of the mechanical level sensor components
Metal staples
3
Secure with
foam material or
polystyrene!
4
To Next Page
Loading...
Need help?
General
