TechnipFMC Sening MultiLevel - The factory settings include the following products


MultiLevel Instruction Manual Parameter List
ID Description Example
>123456789012345678901<
13 Current date + current time >16.09.2004 10:45:23<
14 Current time >Time 10:45:23<
15 Current date >Date 16.09.2004<
16 Current product temperature [° Celsius] >Curr. temp. +23.4 °C<
17 Current product temperature [° Fahrenheit] >Curr. temp. +74.1 °F<
18 Current product temperature [° Kelvin] >Curr. temp. +74.1 °K<
19 Volume VT
20 Volume V15 >V15 123456.7 l <
21 Start time >Start 10:45:23<
22 Start date >Start 16.09.2004<
23 Current compensation factor CTL
24 API table used
25 Average product temperature [° Celsius] >Ave. temp. +23.4 °C<
26 Average product temperature [° Fahrenheit] >Ave. temp. +74.1 °F<
27 Average product temperature [° Kelvin] >Ave. temp. +74.1 °K<
31 Average density
33 Reference temperature [° Celsius]
36 Product name
37  >V15 ~12345.7 l <
38 Wet leg sensor status >Wet leg: dry<
39 Residual volume status >Residual vol: added<
 
16.7. The factory settings include the following products
Table of all used abreviations:
No. Name Abbr. PTB
code
Comp. Density
[kg/m
3
]
Float corr.
(µm)
Factor
1
Factor
2
Factor
3
Min.
Temp.
Max.
Temp.
11 Heating oil EL HEL 1 LIN 835 770 0.84E-3 0.0 0.0 -20 +50
12 Diesel DK 2 LIN 833 780 0.84E-3 0.0 0.0 -20 +50
13 Super unleaded SU5 3 LIN 743 1750 1.27E-3 0.0 0.0 -20 +50
14 Bio-fuel E10 SU10 5 LIN 743 1750 1.27E-3 0.0 0.0 -20 +50
15 Super-Plus (98) SUP 6 LIN 753 1600 1.27E-3 0.0 0.0 -20 +50
16 Petroleum PET 7 54B 807 1000 0.0 0.0 0.0 0 0
17 Jet Fuel JET 8 54B 801 1050 0.0 0.0 0.0 0 0
18 Bio-Diesel (RME) RME 9 LIN 882 550 0.84E-3 0.0 0.0 -20 +50
30 Water H2O 2 --- 1000 0 0.0 0.0 0.0 0 0