Important
All information and technical specifications in this documentation have been carefully checked and compiled by
the author. However, we cannot completely exclude the possibility of errors. TechnipFMC is always grateful to be
informed of any errors.
Measurement Solutions
Regentstrasse 1
D-25474 Ellerbek
Tel.: +49 (0) 4101 304 - 0 (Switchboard)
Fax: +49 (0) 4101 304 - 152 (Service)
Fax: +49 (0) 4101 304 - 133 (Sales)
Fax: +49 (0) 4101 304 - 255 (Order processing)
E-Mail: info.ellerbek@fmcti.com
Web: www.fmctechnologies.com/seningttp
Further documentation on this product:
Description Order number
MultiLevel Driver's operating instructions MNF18019EN / DOK-518
MultiLevel Calibration Instructions MNF18005EN / DOK-480
MultiLevel Calibration Testing MNF18003EN / DOK-514
MultiLevel Seal Receipt MNF18007EN / DOK-482
NoMix Installation / Drawings MNF16002EN / DOK-415
NoMix Approvals MNF16006EN / DOK-454
NoMix Standard / System Circuit Diagrams MNF16007EN / DOK-419
EMIS2 Workshop and Installation Manual MNF19008EN / DOK-447
EMIS2 Wiring Diagrams and Drawings MNF19004EN / DOK-456
EMIS3 Workshop and Installation Manual MNF19009EN / DOK-493
EMIS3 Interface Description MNF19002EN / DOK-411
Documentation on the Internet: www.fmctechnologies.com/seningttp
History
Revision Order number Responsible
sta
Status Description
Rev. 1.00 October 2006 R. Arndt Release Basic Edition
Rev. 1.10 December 2007 MF / jp Release - Format changes/new drawings
- Editorial change
Rev. 1.22 December 2009 GE / jp Release - Chapter 8: new form layout (GE)
Rev. 1.23 May 2010 GE / jp Release - Chapter 10 new „Technical Data“
Rev. 1.27 May 2011 GE / jp Preliminary - Temp. Compensation during Loading
- Loading pre-switching
- Communication: Loading & Delivery Data
- Totalizer / Delivery Report
- Print reports and tables
Rev. 1.29 January 2012 GE / jp Release -Temp. Compensation
- Bioethanol mix (new procedure)
- Second wet-leg sensor
- Adjust sensor allocation
Rev. 1.30 April 2013 jp / elf Release - Format changes
- Editorial revision
Rev. 1.40 September 2018 kb Release - New company branding
To Next Page
Loading...
Need help?
General
