Technogym Steprace - Page 98

STEPRACE: Service & Maintenance Manual - rev. 1.2
Page 9.2
• automatically if the microswitch is present;
• by asking the user if the microswitch is not present.
Left hand bank
Dip-switch
2
Microswitch
ON Absent
OFF Present
In the case of TGS type SW, the presence of the microswitch is configured by setting the
position of dip-switch No. 1 in the group of 4:
Right hand bank
Dip-switch
1
Microswitch
ON Absent
OFF Present