Tektronix CSA7404B - Page 235

Removal and Installation Procedures
CSA7404B, TDS7704B, TDS7404B, TDS7254B & TDS7154B Service Manual
6-15
Left side trim
Front panel trim
Acquisition trim
Right side trim
T-15 Torx
screw (3)
T-15 Torx screw
(4)
Top cover trim
T-15 Torx screw
(2)
Carrying handle
Snap stud (4)
To remove the trim ring, slide the flat
end of a soldering aid into the side
slot on the trim ring. Press in, then lift
up to hook it underneath, then pry
up.
Soldering aid
Figure 6- 3: Trim removal