Removal and Installation Procedures
6-40
CSA7404B, TDS7704B, TDS7404B, TDS7254B & TDS7154B Service Manual
c. Grasp the low-voltage power supply and carefully slide the assembly out
of the instrument.
4. Reinstallation: Do in reverse steps a through c to reinstall the low-voltage
power supply.
T-15 Torxdrive
screw (3)
T-15 Torxdrive
screw (2)
Low-voltage
power supply
Figure 6- 24: Low-voltage power supply removal
To Next Page
Loading...
