Get Acquainted w
ith the Instrument
24. P rint . Push to p
rint a screen image using
the printer selected in the Utility menu.
(See page 151, Printing a H ard Copy .)
25. P ower switch. Push to power on or off
the instrume
nt.
26. USB 2.0 host ports. Insert a USB
cable here to connect peripherals to the
oscilloscope, such as a keyboard or a
flash drive. There are two more USB 2.0
host ports on the rear panel.
27. S ave. Push to perform an immediate
save operation. The s ave operation uses
the current save parameters, as defined
in the Save / Recall menu.
28. Default Setup . Push to perform an
immediate restore of the oscilloscope to
the default settings.
29. D15 - D0. Push to display or remove the
digital channels from the display, and to
access the digital channel setup menu
(MSO4000B Series only).
30. Menu Off. Push to clear a displayed
menu from the screen.
38 MSO4000B and DPO 4000B Series Oscilloscopes User Manual
To Next Page
Loading...
Need help?
General
