Tektronix TG8000 Programmer's Manual

Getting started
To help you get started with programming the TG8000, this section includes the
following subsections:
Overview of the Manual Summarizes each major section of this manual.
Connecting the Interface Describes how to physically connect the analyzer to
a controller.
Overview o
fthemanual
The information contained in each major section of this manual is described below.
Syntax and commands
Section 2, Syntax and Commands, desc ribes the structure and content of the
messages your program sends to the analyzer. Figure 1–1 shows command parts
as described in the Command Syntax subsection.
Figure 1 : Command parts
Section 2 also describes t he effect of each command and provides example s of
how you might use it.
Err
or messages and codes
The program may request information from the instrument.Theinstrument
provides information in the form of status and error messages. Section 3, Status
and Events
Draft
TG8000 Multiformat Test Signal Generator Programmer Manual 1

Tektronix TG8000 Specifications

General

Brand	Tektronix
Model	TG8000
Category	Portable Generator
Language	English