AG7 Audio Generator module remote commands
Command description
:SENSe:CORRec
tion:MDELay <numeric_value>
Sets the timing offset of the audio outputs. The numeric values range from
-160 ms to 160 m
s in 1ms steps. You can use U P, DOWN, or DEF instead
of the numeric values.
:SENSe:CORRection:MDELay?
Returns the timing offset of t he audio outputs.
:SENSe:CORRection:MDELay:S TEP <numeric_value>
Sets the step increment used by the UP or
DOWN commands. The unit
is microseconds.
:SENSe:CORRection:MDELay:S TEP?
Returns the step increment u sed by the UP or DOWN commands.
Draft
TG8000 Multiformat Test Signal Generator Programmer Manual 31
To Next Page
Loading...
