Tektronix TG8000 Programmer's Manual

AVG7 Analog Video Generator module remote commands
:SENSe1:CORRe
ction:MDELay:VERTical:STEP <num eric_value>
Sets the step increment used by the UP or DOWN commands. You can use
MIN, MAX, or DE
F instead of a numeric value.
:SENSe1:CORRection:MDELay :VERTical:STEP
Returns the current step increment.
Draft
52 TG8000 Multiformat Test Signal Generator Programmer Manual

Tektronix TG8000 Specifications

General

Brand	Tektronix
Model	TG8000
Category	Portable Generator
Language	English