Section D – Tester Installation
CD14 Tester & CD AutoPlus Autosampler User Guide—75-108-800 Rev. B—31 May 2021 35 of 130
EAR99 technology subject to restrictions on cover page.
8. Plug in the network connection (if applicable) to the
connector located on the lower end of the mast.
9. With the drive head power switch in the off (O)
position, plug in the power brick power cord to a
power source.
10. With the heater power switch in the off (O) position,
plug in the heater power cord to a power source.
To Next Page
Loading...
