OptiCon Micro
Installation and Operation Manual
33
Conditions
1. A station receiving a forwarded call can transfer the call to the forwarding station.
2. Calls cannot be forwarded to a station in DND; if attempted, an error tone is returned.
3. Call Forward status is maintained in the system‟s non-volatile memory for protection from power
outage.
4. The Forward feature is not available to SLT/FAX port.
5. A station cannot forward to another station in DND.
6. If a line is not an auto answering type and has 2 or more ring assigned stations, the call from the
line is not forwarded to the forwarded destination of ring assigned stations.
7. If the line has one ring assigned station, the call from the line will forward to forwarded destination
of the ring assigned station.
8. A station in DND cannot activate forward.
9. If an external call is forwarded to external destination (Line to line call), the call duration will be
limited to the “Line to Line call timer” (Menu 3 4 9).
10. Calls forwarded Off-Net are subject to restriction (Menu 1 5 1). The exception is calls forwarded
to speed dial numbers (200~399).
Programming
CONFIGURATION Offnet forward/transfer – [Menu] + 1 5 3
SUPPLEMENTARY Line to Line call timer – [Menu] + 3 4 9
To Next Page
Loading...
