OptiCon Micro
Installation and Operation Manual
38
3.6 Three-Party Voice Conference
Description
The system will allow a three party conference (internal and/or external parties can be connected on a
conference call. Only the LWS-BS station may initiate a conference call. If the base station goes on-
hook the conference will be terminated.
Operation
To establish an ad-hoc conference:
LWS-BS station
1. Establish the first call.
2. Press the [Conf] soft button; and the connected party is placed on exclusive hold.
3. Place the second call.
4. When connected, press the [Conf] soft button to establish 3-party conference.
Conditions
1. If the system receives a disconnect signal and no internal parties remain in the conference, the
conference is terminated and all parties are disconnected. If an internal party is still connected
when a disconnect signal is received, the connection to remaining parties is maintained.
2. A station that is busy, in DND or other non-idle state cannot be added to a conference.
3.7 Directory
Description
A name, up to 12 characters, may be assigned to each Station and System Speed Dial. When assigned, a
user of LWS-BS may place an external call to a Station or System Speed Dial using the name.
Operation
To use Dial by Name:
LWS-BS phone
1. Press the [Directory] soft button
2. Select “Station directory” or “System directory”.
3. Select desired name and press the [Send] soft button
To toggle between the name and number display:
1. Press the [Select >] soft button
2. Press the [Name/Tel] soft button.
Conditions
1. The LCD will display multiple names (one per LCD line, up to 12 characters).
2. If a user selects a directory with no entries or there is no match to the user entry, error tone is
provided.
To Next Page
Loading...