Telkom OPTICON MICRO - Phonebook Entry Management; Edit CO Code for Phonebook; Dialing from Phonebook

OptiCon Micro
Installation and Operation Manual
44
To program an Individual Speed Dial number:
1. Press the [Directory] button.
2. Press the [Speed] button.
3. Press the [Add] button.
4. Dial the Speed Dial bin number (00-19).
5. Press the {Line} button or dial the Line access code (ex. 0 or 8801 ~ 8803).
6. Dial the number to be stored.
7. Press the [Save] soft button.
8. If desired, enter a name.
9. Press the [Save] soft button.
Conditions
1. Accessing an empty Speed Dial bin will return an error tone.
2. All Speed Dial numbers are stored in memory protected from power loss.
3. A name can be entered for a Speed Dial number to permit access from the Directory.
3.15.3 System Speed Dial
Description
Commonly dialed numbers can be stored by the LWS-BS station. Up to 800 System Speed Dial numbers
are available. Each Speed Dial number can be up to 23 digits in length and may include special
instruction codes.
Operation
To dial using a System Speed Dial:
1. Lift the handset or press the [Speaker] button.
2. Press the [Directory] soft button.
3. Press the [Speed] soft button.
4. Dial the desired bin number („200‟-„999‟).
LWS-WK
1. Lift the handset or press the [Speaker] button.
2. Dial the {Speed Dial Access} code (ex. 558) or press the [Speed] soft button.
3. Dial the desired bin number („200‟-„999‟).
GDC-400H/450H
1. Press the ([Talk] key).
2. Dial the {Speed Dial Access} code (ex. 558) or press the [Speed] button ( ).
3. Dial the desired bin number („200‟-„999‟).