OptiCon Micro
Installation and Operation Manual
39
3.8 DND (Do Not Disturb)
Description
A station can be placed in DND to block incoming Line calls, Intercom calls and transfers.
Operation
To activate DND:
LWS-WK
1. Press the [DND] button; the [DND] button LED illuminates.
GDC-400H/450H
1. Press the ([Talk] key).
2. Dial {DND} code (ex.553).
To remove DND:
LWS-WK
1. Press the [DND] button; the [DND] button LED extinguishes.
GDC-400H/450H
1. Press ([Talk] key).
2. Dial {DND} code (ex.553).
Conditions
1. DND service is not available to the LWS-BS station.
2. Recalls for Line calls will override the DND feature.
3. A station in DND is bypassed by calls forwarded to the station; if the last station in a Call Forward
chain is in DND, the call will ring to the previous station in the chain.
4. When calling a station in DND, the station display will indicate the DND status.
5. The forwarding station cannot activate the DND feature.
6. The station forwarded from the LWS-BS station cannot activate the DND feature.
3.9 Headset Compatibility
Description
LWS-BS station
The [Headset] button may be used only to select the mode between headset and speakerphone in idle
state. In busy/talking state, the switchover between headset and speakerphone is not supported.
In the headset mode, pressing the [Speaker] button will send audio to the Headset instead of the
speakerphone.
LWS-WK
By pressing the [Headset] button, the user can use headset, immediately.
In talk mode with the headset, if the user presses the [Speaker] button, the user can talk with the
speakerphone.
To Next Page
Loading...