OptiCon Micro
Installation and Operation Manual
57
Conditions
1. A busy station receives muted ring or Call Waiting tones (as appropriate) for the station‟s off-hook
ring assignment. In Night/weekend mode, Line ring assignment is disabled.
2. In case of the GDC-400H/450H and LWS-WK, a maximum of 6 stations can be assigned for each
line.
3.21 Night/Weekend mode
Description
In Night/Weekend mode, a specific station or “System voice mail” is assigned as the ring destination for all
calls on a Line.
Operation
LWS-BS station
To activate Night/Weekend mode:
1. Press the [DND] button.
2. Select the ring destination or “System VM”.
3. Press the [Save] soft button. Then the DND LED is turned on.
To deactivate Night/Weekend mode:
1. Press the [DND] button.
2. Select “OFF”.
3. Press the [Save] soft button. Then the DND LED is turned off.
Conditions
1. In Night/Weekend mode, the DND LED of base station is turned on.
2. If the LWS-BS station is forwarded to another station, the user can activate/deactivate the
Night/Weekend mode at the receiving station.
3. If the ring destination of Night/Weekend mode is set to “System Vm”, the caller can leave a voice
message to the voice mailbox of the station assigned for “System voice mail” (Menu 2 5).
Programming
VOICE SERVICES System voice mail – [Menu] + 2 3
3.22 Call Log Display
Description
The LWS-BS station can view a log of incoming, outgoing and missed calls on the display and place a call
from the call log.
To Next Page
Loading...
