OptiCon Micro
Installation and Operation Manual
48
Description
When a station activates Call Forward to the VSF, calls to the station will forward to the station VSF
mailbox. The caller receives the called station‟s User Greeting followed by a beep tone.
The remote caller can record a message and hang-up or dial „*‟ for further options. The VM application
stores the message in the called user‟s voice mailbox and activates the Message Waiting indication at the
user‟s station. If the “Ring/Vm LED” (Menu 1 5 4) of the station is set to “VM”, the Ring indication LED of
the station will flash to indicate a new voice mail (LWS-BS and LWS-WK only).
Operation
Remote Caller
To leave a voice message after hearing announcement:
1. Wait for the beep and then leave a message.
2. Hang up to quit recording,
OR
2. Dial „*‟ for more options.
Conditions
1. If all the VSF channels are in use, Ring Back tone is provided until a VSF channel is available.
2. Individual User Greetings and Voice Mails are protected from AC power loss.
3. When a voice mail is left, the end of the message will contain error tone. The error tone can be
eliminated employing the VM Cut error tone timer. The system will delete, from the end of the
message, the portion of the message defined by the VM Cut Error Tone timer.
Programming
CONFIGURATION Ring/Vm Led – [Menu] + 1 5 4
SUPPLIMENTARY Vm cut error tone timer – [Menu] + 3 4 4
3.16.4.2 Message Retrieval
Description
A user can access their Mail Box locally by placing a call to the VSF Voice Mail group, by pressing the
[MSG] button, or by dialing VSF voice mail code (ex. 620)
To Next Page
Loading...