OptiCon Micro
Installation and Operation Manual
50
LWS-WK
1. Press [Speaker] button.
2. Press {Change VM password} code (ex.559).
3. If a current password exists, enter the station number and current password.
4. Press [Hold] button.
5. Enter the station number and new password
6. Press [Hold] button in LWS-WK.
GDC-400H/450H
1. Press the ([Talk] key).
2. Press {Change VM password} code (ex.559).
3. If a current password exists, enter the station number and current password.
4. Press the ([Navigation] right key) longer than 1 second.
5. Enter the station number and new password.
6. Press the ([Navigation] right key) longer than 1 second.
To remove password for voice mail:
1. Press the [Menu] button in LWS-BS station.
2. Press 4 2.
3. Select the station number with [Navigation] right/left button.
4. Press the [OK] soft button.
For Australia, this process will return the password to default, the station number and „*‟.
To retrieve Voice Mail locally:
LWS-BS station
1. Lift the handset or press the [Speaker] button.
2. Dial the {Voice mail} code (ex. 620).
3. Dial the Mailbox number (station number) and corresponding password to receive the “Number of
Messages” prompt.
4. Dial desired option code.
5. At completion of session, hang-up to return to idle.
LWS-WK
1. Lift the handset or press the [Speak] button.
2. Dial the {Voice mail} code (ex. 620).
3. Dial the Mailbox number (station number) and corresponding password to receive the “Number of
Messages” prompt.
4. Dial desired option code.
5. At completion of session, hang-up to return to idle.
To Next Page
Loading...