Tenda AC1200 User Manual

84
Configuring procedure:
Step 1 Start a web browser on a device connected to the router and visit tendawifi.com to log in
to the web UI of the router.
Step 2 Enable the PPTP server function.
1. Choose VPN > PPTP Server.
2. Enable the PPTP Server.
3. Enable the MPPE Encryption, which means that the encryption digit remains the default
value “128”.
4. Click Save.
Step 3 Add PPTP user name and password.
1. Set the User Name and Password of the PPTP server, which are admin1 in this example.
2. Click +New.
---End
When completing the configurations, internet users can access the FTP server by following these
steps:
Step 1 Click the icon at the bottom right corner on the desktop, and then click Network
settings.

Tenda AC1200 Specifications

General

Data Transfer Rate	1200Mbps
Wireless Standard	IEEE 802.11ac/a/n 5GHz, IEEE 802.11b/g/n 2.4GHz
Frequency Bands	2.4GHz, 5GHz
Wireless Speed	300Mbps (2.4GHz) + 867Mbps (5GHz)
Antenna	4 x 5dBi external antennas
Security	WPA/WPA2-PSK
Button	WPS button, Reset button
DHCP Server	Support