Get to know your device
3
HG6
◼ LED indicators
The ONT is powered on properly.
The ONT is powered off or not powered on properly.
The ONT is registered successfully.
The registration is not completed (unregistered or registering).
The received optical power is lower than the optical receiver
sensitivity, or no fiber cord is connected.
The received optical power is lower than the optical receiver
sensitivity, or no fiber cord is connected.
The received optical power is within the optical receiver sensitivity.
The LAN port is connected properly, but no data is being
transmitted over the corresponding port.
The LAN port is connected properly, and data is being transmitted
over the corresponding port.
No Ethernet device is connected or the Ethernet device is not
connected to the LAN port properly.
The ONT is registered with the IMS (IP Multimedia Subsystem), but
no data is being transmitted.
The ONT is registered with the IMS, and data is being transmitted.
The ONT is not registered with the IMS.
The Wi-Fi network is enabled, but no data is being transmitted
wirelessly.
The Wi-Fi network is enabled, and data is being transmitted
wirelessly.
The Wi-Fi network is disabled.
A WPS connection is established.
The ONT is performing WPS negotiation.
The ONT is not performing WPS negotiation.
The USB device is connected to the USB port properly, but no data
is being transmitted over the port.
The USB device is connected to the USB port properly, and data is
being transmitted over the port.
The USB port is disconnected or not connected properly.