Tenda PON ONT HG9 User Manual

Get to know your device
2
LED indicator
Color
Status
Description
Off
No Ethernet device is connected or the Ethernet device is not
connected to the LAN port properly.
LOS
Red
Blinking
The received optical power is lower than the optical receiver
sensitivity, or no fiber cord is connected.
Off
The received optical power is within the optical receiver sensitivity.
PON
Green
Solid on
The ONT is registered successfully.
Blinking
The registration is not completed (unregistered or registering).
Off
The received optical power is lower than the optical receiver
sensitivity, or no fiber cord is connected.
PWR
Green
Solid on
The ONT is powered on properly.
Off
The ONT is powered off or not powered on properly.
◼ Ports & buttons
Jack/Port/Button
Description
PWR
Power jack.
Please use the included power adapter to connect the ONT to a power source.
LAN
Gigabit LAN port.
Used to connect to a router, switch or computer.
FIBER
SC/APC optical fiber port.
Used to connect to the optical network.
RST
Reset button.
After the ONT completes startup, use an object with a spike to hold the button
down for more than 10 seconds and then release it. All LED indicators light off in a
few seconds. When the PWR LED indicator lights solid on again, the ONT is reset.

Tenda PON ONT HG9 Specifications

General

Brand	Tenda
Model	PON ONT HG9
Category	Network Router
Language	English