Tenda PON ONT HG9 User Manual

WAN
44
Parameter description
Parameter
Description
UserName
They specify the PPPoE user name and password for settings up the WAN connection.
Password
Type
It specifies the PPPoE connection type.
⚫
Continuous: The ONT keeps connected to the internet.
⚫
Connect on Demand: The ONT disconnects from the internet after a certain period
and establishes the connection as soon as you attempt to access the internet.
⚫
Manual: Users should manually connect and disconnect the network connection.
AC-Name (HG6)
It specifies the PPPoE server name, for the ONT to verify the legitimacy of the PPPoE
server.
If your ISP did not provide a service name, leave this field blank. Otherwise, a dial failure
may occur.
Service-Name (HG6)
It specifies the PPPoE service name used by the PPPoE server to verify the legitimacy of
the ONT.
If your ISP did not provide a service name, leave this field blank. Otherwise, a dial failure
may occur.
6rd configuration
When you want to access a certain IPv6 network or service of your service provider through an
IPv4 network and you are provided with related parameters, you can set up a 6rd connection.
When Channel Mode is set to 6rd, these parameters are required.

Tenda PON ONT HG9 Specifications

General

Brand	Tenda
Model	PON ONT HG9
Category	Network Router
Language	English