Tenda PON ONT HG9 User Manual

Services
71
Configuring procedure:
Step 1 Log in to the web UI of the ONT.
Step 2 Add a port forwarding rule.
1. Choose Services > Firewall > Port Forwarding.
2. Set Port Forwarding to Enable, and click Apply Changes.
3. Select Enable and select FTP Server from the Application drop-down list.
4. (Optional) Modify Comment for the rule, which is FTP server in this example.
5. Set Local IP, which is 192.168.1.136 in this example, and leave Remote IP blank.
Step 3 Assign a fixed IP address to the host where the server locates.
6. Choose Services > Service > DHCP.
7. Click MAC-Based Management.
8. Set MAC Address of the host of the server, which is D4-61-DA-1B-CD-89 in this example.
9. Set Assigned IP Address for the server host, which is 192.168.1.136 in this example.
10. Click Assign IP.
---End
Access using an IP address
WAN IP address:
102.33.66.88
FTP server
IP address: 192.168.1.136
Service port: 21
MAC address: D4:61:DA:1B:CD:89

Tenda PON ONT HG9 Specifications

General

Brand	Tenda
Model	PON ONT HG9
Category	Network Router
Language	English